New to forum, and decided to work on problem myself. My gas gauge was not reading correct amount of fuel in fuel tank, I actually ran out of gas a couple times. I could put a couple gallons of gas in tank and car would start back up. I decided to work on this myself, removed and tested both Main and Sub sending units. Turned out to be the "main" so I replaced it and now correct amount of fuel in tank is showing on fuel gauge. Problem is car will not turn over now. I put everything back together in reverse order, made sure all wires were connected. I can turn the key and hear the fuel pump kick in but car will not start. What am I missing, thought it would start right up. Do you need to prime the pump or do anything else to the pump or fuel lines once the pump has been removed and put back in.
Any assistance would be very much appreciated.
Walt
Any assistance would be very much appreciated.
Walt
0 commentaires:
Enregistrer un commentaire