I've got an 04 rx8.
It won't start-cel flashes indicating misfire. obd says misfire in cylinder 1.
New plugs, new wires and new bhr coils.
I put an ignition tester on the plugs to test. The trailing plug on the front rotor took a little over 3 seconds of cranking before it started firing. The other plugs started firing more or less immediately.
I'm assuming that there's a problem somewhere from the ecm to before the coils.
How would I go about testing the coil connector?
Any suggestions as to how I should proceed with testing to figure out the source of the problem?
It won't start-cel flashes indicating misfire. obd says misfire in cylinder 1.
New plugs, new wires and new bhr coils.
I put an ignition tester on the plugs to test. The trailing plug on the front rotor took a little over 3 seconds of cranking before it started firing. The other plugs started firing more or less immediately.
I'm assuming that there's a problem somewhere from the ecm to before the coils.
How would I go about testing the coil connector?
Any suggestions as to how I should proceed with testing to figure out the source of the problem?
Misfire with new plugs, wires and bhr coils
