I replaced my struts, and the front end sits high now, and there is a pretty big wheel gap. I have 2 questions.
1. The stock monroe replacement struts in the front have a plastic square piece on the end, should I have removed this?
2. I found somewhere else that you are not supposed to tighten the inner A frame ends or bottom shock bolt until you lower the car and push down to settle the suspension. Do I need to jack it back up, loosen these bolts and try to tighten it sitting on the ground?
On an unrelated note, I destroyed the rear tires by not getting it aligned after strut replacement. $500 mistake.
1. The stock monroe replacement struts in the front have a plastic square piece on the end, should I have removed this?
2. I found somewhere else that you are not supposed to tighten the inner A frame ends or bottom shock bolt until you lower the car and push down to settle the suspension. Do I need to jack it back up, loosen these bolts and try to tighten it sitting on the ground?
On an unrelated note, I destroyed the rear tires by not getting it aligned after strut replacement. $500 mistake.
0 commentaires:
Enregistrer un commentaire