Rx8 dies on Drive or Reverse

vendredi 31 octobre 2014

First if all here's the background of my car http://ift.tt/1tKj7xN



2004, Automatic, New JDM 50k engine, 4 port, 127k transmission, new radiator, (anything else just ask)



I want to thank everyone who helped me, the car now runs fairly well. One problem i have now is getting it started, I hear 3 beeps and it usually takes about 8 seconds cranking for it to start and no white smoke after starting. That's not my main issue, however, as I think that can be fixed with some fresh spark plugs. The starter RPMs are about 260/min per OBD scanner.



My main issue is that once the car turns on, it'll iddle just fine. Although the RPMs drop slightly and the car vibrates but the engine never let's itself shut off. Then when I try to switch to Drive or Reverse the car will just shut off, maybe jerk a little. I need help figuring this out, I have reset everything possibly resetable as well as cleaned and checks maf, ess sensor, filter, oil, tranny fluid, tranny connections, wires, coils, plugs, (need new). Check engine light is on, but no codes come up(possibly from disconnecting battery or old codes from old engine)



One last thing, once the engine shuts off after being warm it won't turn back on until about 10-15 minutes later. And sometimes when I rev it up to about 4-5K after a while it'll just die out all of a sudden.



Some things I thinks may be the issue

Fuel pump (could be loss of fuel so engine dies)

Cat (could be engine can't breathe and dies)

Torque converter (we towed it for about 3 hours so it might've damaged it)



What do you guys think? Any help would really be appreciated!




0 commentaires:

Enregistrer un commentaire

 

Lorem

Ipsum

Dolor