How do I test this brand of coils?

Hi folks, after searching, I could not find a thread about "testing" our ignition coils. The stealership says my leading ignition coil in rotary chamber 1, is arcing and needs to be replaced.



I have two replacement ignition coils, so I was planning on replacing the failing ignition coil and the next "worst" ignition coil in the set.



After looking on this form and then You-Tube, there isn't any videos on how to test our particular brand of spark plugs with a multimeter.



This is what I have:







The plug on it's side is the one that is supposedly arcing. However the multimeter (Ohms) does not give me any readings on these coils.



First question:

1: HOW do I probe our brand of ignition coils to get some numbers to start comparing.



Second question:

2. Just curious if I have the right numbers to look for:

Up to 0-200 Ohms first test = around 1.7 is good right?

Up to 0-20k Ohms second test = around 8k ohms is good right?



Third question:

3. I assume the 1st rotary chamber is the one closes to the front bumper. The second is facing the drivers cabin area?



I'd really like to get my car running again, but I don't want to replace the wrong coils.



Thank you so much gentlemen!