Custom made tow hitch for S1s. Clamps over bumper reinforcement bar, and the receiver sits in the rotor-shaped hole in the rear bumper. This takes a 1 1/4" draw bar, and I will include the draw bar which makes a small trailer sit level (at least my 4x4 trailer). Effectively invisible when drawbar is removed.
Will ship UPS to lower 48 for cost; if you're willing to come by Charleston, SC you can have the bumper reinforcement with it. Bumper cover too for extra $.
Made of welded plate and angle steel and painted with multiple coats of black paint. I used the rear tow eye for the safety chain attachment. Used this to tow a small trailer for autoX, moving, and generally not having a truck any more.
Will ship UPS to lower 48 for cost; if you're willing to come by Charleston, SC you can have the bumper reinforcement with it. Bumper cover too for extra $.
Made of welded plate and angle steel and painted with multiple coats of black paint. I used the rear tow eye for the safety chain attachment. Used this to tow a small trailer for autoX, moving, and generally not having a truck any more.
{ FS } Custom tow hitch - through rear rotor shape
0 commentaires:
Enregistrer un commentaire